SP5 Phase Shifter and Metal Loss Corrector

The SP5 is a signal processor which introduces a phase shift across the audio band between two separate amplifiers. When specified with a suitable loop design, it is used for a variety of system applications. Large area systems Rooms with structural metal Theatres with balconies Confidential systems Adjacent locations An Ultra-Low-SpillTM Induction Loop System uses two carefully designed loop arrays, which are overlaid in the same area, and are driven by two loop drivers. This type of design can reduce the spill field from the loop within 1.5m of the loop perimeter. To minimise any unwanted interaction between the two arrays, the SP5 creates a 90º phase difference between the signals into the amplifiers. The SP5 also incorporates Ampetronic’s Metal Loss Correction system. This same phase shift requirement may also exist when driving balconies which overhang a seating area. The phase shift minimises the interaction between the two loops to deliver a uniform field strength on both floor levels. To greatly reduce the effect of loss due to metal in the building construction, two arrays are often used (as for Ultra-low spillTM). In both cases careful design of the complex loop layout is essential. Ampetronic can offer this design service. The SP5 is built into a standard1/6 rack width unit. Rack mounting trays and blanking plates can also be provided. The SP5 is supplied with the required power lead and input and output signal leads.